The Mindeo MD-2000 laser barcode scanner is a general use 1D laser barcode scanner. If you are looking for a reliable, highly configurable and reasonably priced barcode scanner with all the features of expensive Barcode scanners then this is the best option available.
Using these barcode scanners is easy, Just plug it in, allow your operating system to detect the barcode scanner, and you are ready to go.
Andtech is an official distributor of the entire range of Mindeo barcode scanners. USB and Serial interface units are available.
The Mindeo MD-2000 barcode scanner comes standard with auto sensing and a scanner stand.
| Specifications | |
| Input voltage | 5 VDC ± 0.25V |
| Current | 500 mW (Operating); 650 mW (Max.) |
| Standby current | 30mA (Standby), 120mA (Max – operating ) |
| Laser | Laser 645-660nm laser diode |
| Scan repetition rate | 200 scans/second |
| Scanning angle | ±60°, ±65°, ±42° (Skew, Pitch, Roll) |
| Decode capability | All major 1D barcode symbologies including GS1 DataBar variants |
| Indicator | Beeper, LED |
| Interface supported | Keyboard wedge, RS-232, USB keyboard, USB virtual COM |
| Operating mode | Hand-held, Auto-detection (Optional) |
| Dimensions | 8.2cm H × 6.7cm W × 1868cm D |
| Weight | 121g, without cable |
| Cable | Straight 2.0m |
| Connector type | RJ-45 phone jack connector |
| Case material | PC+TPU |
| Temperature | 0° to 50°C , Operating; -40° to 60°C , Storage |
| Humidity | 5% to 95% (non-condensing) |
| Programming method | Manual (reading special barcode) |
| Program upgrade | Online |
| Decoding depth & Max. resolution | 3 mil: 27 – 65mm 10 mil: 10 – 320mm 13 mil: 16 – 380mm 20 mil: 19 – 620mm 30 mil: 25 – 770mm |
| Safety | Laser safety EN60825-1, Class 1 |
| ESD: 15 kV area discharge; 8 kV contact discharge EMC: EN 55022, EN 55024 Electrical safety: EN 60950-1 Drop resistance: Multiple 4.0m drops to concrete Protection class: IP52 |
This website uses cookies.